Quanlong Power Heads Submersible Pump QL-878

Description

Caution:-

1. When the water level drops before completely submerging pumps, you should immediately turn off the power and put into a suitable water. Otherwise it can cause damage to the motor. While installing or disassembling the product or cleaning the filter material, you must unplug the power cord to make sure the power is disconnected.
2. When the voltage is too low the motor cannot start, you should adjust the voltage to 180V or more.

SAFETY INSTRUCTION

1. Make sure the fact voltage is the same as the rated voltage on the pump with label before use.
2. The pump adapts to fresh and marine water.
3. The pump adapts to 0°C-35°C water.
4. The pump must not work outside water.
5. Stop the pump working when the unchangeable cable is broken.
6. Cut the electricity before installing, uninstalling and clean the pump.

Power 25W

F.Max 1500/L

H.Max 1.5m

Voltage AC 220-240V

Frequency 50Hz